Aebi New England, LLC

Home New Equipment Used Equipment Contract Mowing Service & Parts Dealers Trade Shows News / Events About Us Site Map

 

Hydrocut HC44

Specifications

Back Up

Engine 11 HP @ 3600 rpm, gasoline Briggs + Stratton Industrial Plus, 338 cc, 1 cylinder, 4 stroke, air-cooled, mechanical regulator, rewinding starter, electronic ignition, regulating speed 3200 rpm.
Transmission Mower driven from the clutch shaft via the single plate clutch and a pair of spur gears. Hydrostats driven from the crankshaft two toothed belts.
Traction drive Two hydrostatic drive units with radial piston pumps and motors, each with two planet gears.
Mower drive 858 rpm. Single plate clutch which can be switched in and out from the handlebars.
Speeds Slow: forwards 0-2.2 mph
reverse 0-2.1 mph
Fast: forwards 0-4.2 mph
reverse 0-2.9 mph
Traction drive control Mechanical traction drive control with self-limiting, adjustable drive lever via Bowden cable with safety stop to prevent undesired switching to reverse. Two speed ranges selectable by changing the position on the speed control lever or the spherical head of the cable, hence changing its length.
Steering Active steering via the hydraulic drive system. Open handlebars with rapid sideways and vertical adjustment. Rubber mounted handlebars.
Tires Single or double high-profile tires 5.0-10. Cage wheels can be used with single wheels. Terra tires 21 x 11.0-8 with a second wheel 5.0-10 or cage wheel.
Track width 29.9 and 36.6 inches with 5.0-10 tires.
30.3 and 36.2 inches with terra tires 21x11.0-8.
Weight with flail mower 599.6 lbs
with mowing device and swing cover plate, but without cutter bar 463.0 lbs
with double cutter, mowing device and swing cover plate, but without cutter bar 469.6 lbs
Fuel tank 1.6 gallons

Technical specifications are subject to change without notice.

 

166 River Street - Alstead, NH  03602-3136
Tel: 603-835-2600 - Fax: 603-835-2601 - Email: information@aebi-ne.com

Copyright © 2008 Aebi New England, LLC. All rights reserved.
Updated by Advanced Business Concepts, January 05, 2008 01:34 PM